Points to note for licensed passenger cars mainly include the following aspects:
Check the license plate: Make sure the license plate is clearly visible, without damage or obstruction, and the information is complete so that it can be accurately identified on the road.
Familiar with the rules: Understand and comply with local specific regulations on the use of license plates, such as night-time reflective requirements, to improve driving safety.
Vehicle inspection:
Tire condition: Check whether the tire surface is intact, paying special attention to whether there are scars or bulges on the sidewalls.
Fluid level: Make sure that the engine oil, transmission oil, steering oil and brake fluid are within the normal range.
Lighting system: Check whether the functions of turn signals, low beams, high beams, fog lights and width lights are normal.
Brake system: Check the thickness of the brake pads to ensure that the brake system is in the best condition.
Wiper: Make sure that the wipers are working properly and there is no missed wiper phenomenon. Driving habits:
Observe traffic rules: Do not exceed the speed limit, do not run red lights, do not change lanes at will, keep a safe distance from the car in front, and avoid sudden braking and acceleration.
Adapt to the performance of the new car: The new car may be different in terms of handling performance, braking sensitivity, etc., and you need to adapt gradually.
New car running-in: During the running-in period of the new car, avoid long-term high-speed driving and heavy-load driving, and reasonably control the engine speed and vehicle speed.
Emergency handling: Understand basic emergency handling knowledge, such as how to deal with a tire blowout, preliminary judgment of engine failure, etc.
Safety equipment: Ensure that the vehicle is equipped with emergency safety hammers, fire extinguishers, faulty vehicle warning signs and other equipment to deal with emergencies.
Document preparation: Carry relevant documents such as vehicle registration and driver's license, and ensure that they are used within the validity period.